Did your alarm go off just as you were leaving the premises, but the Central Station did not call?
In a attempt to prevent false alarms, your panel has a Audible Exit Fault. If you arm your alarm and do not exit
through your delay door by the appropriate time, it will begin counting down your entry delay. The system will
notify you that it was improperly armed in two ways: the keypad will emit one continues beep and /or the siren will
sound. If this occurs:
1) Re-enter the premises.
2) Enter your access code to disarm the system. You must do this before the entry delay time expires.
3) Follow the away arming procedure again. Make sure to close the exit/entry door properly.
Do you need to reset your time and date on your keypad?
Click here. Find your panel type then follow directions as indicated
Copyright 2012 PROTEK. All rights reserved.